1. Introduction
Welcome to the official documentation for Smart Plug IoT. This guide provides comprehensive instructions on deploying, configuring, and maintaining your integration with the myECO ecosystem. Our platform is designed to provide seamless interoperability with existing industrial and commercial infrastructure.
—
2. System Requirements
Before beginning the installation process, ensure your environment meets the following minimum requirements:
• Network: 2.4GHz Wi-Fi (802.11 b/g/n) or Ethernet
• Power: 100-240V AC, 50/60Hz
• Environment: -10°C to 50°C operating temperature
• Gateway: myECO Edge Hub v2.0+
—
3. Installation Guide
Step 1: Physical Mounting
Secure the device to the DIN rail or mounting bracket. Ensure adequate ventilation space around the unit.
Step 2: Wiring
Connect the live and neutral wires according to the schematic. WARNING: Ensure main power is disconnected before wiring.
Step 3: Initial Power-up
Restore power and verify the status LED blinks blue, indicating readiness for provisioning.
—
4. Configuration
Access the local configuration portal by connecting to the device’s fallback Wi-Fi network (SSID: myECO-Setup-XXXX). Navigate to 192.168.4.1 in your browser.
Enter your enterprise Wi-Fi credentials and the MQTT broker endpoint provided in your myECO dashboard. Save and reboot the device.